USED G&L / SB-2 Made in USA 1996 Natural [12]

G&L SB-2 made in 1996 is now in stock.
G&L, created by Fender founders Leo Fender and George Fullerton, made the SB-2, a classic bass made in California, USA, and made in 1996 according to the neck/body date.

It has an ash body, maple neck and rosewood fingerboard with 21 frets, and is equipped with the original MFD pickups in P-J arrangement, allowing for intuitive and crisp sound creation based on a fat, high-pressure sound.

Two different pickups with different characters allow for a crisp, bouncy tone and a fat, punchy sound.
There are some minor scratches and dings, and the hardware is dull, but it is in good condition with little signs of use.
The instrument has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: B031717
Year of manufacture: 1996
Country of manufacture: USA
Case: Original hard case
Weight: 4.41kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.5mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 26.0mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Alterations: Fret adjustments
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number B031717

Year of manufacture 1996

Country of manufactureAmerica

CaseGenuine hard case

Weight 4.41kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, there is enough fret height

String height: 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 38.5mm

Neck thickness near the 1st fret 22.0mm

Neck thickness near 12th fret 26.0mm

Scale 864mm (34")

RADIUS184mm (7.25")

Strings for setup D'Addario EXL165 / .045-.105 set

Modified part fret adjustment

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment