USED Ken Smith / BURNER Walnut 4ST Natural Matte [12]

The Ken Smith Burner made in Japan is now in stock.
This model is manufactured in Japan under license from Ken Smith, a New York high-end bass brand and inventor of various specifications in modern active basses.

The multi-layered body is made of walnut on the top and back, and the 5-piece maple neck and rosewood fingerboard are jointed with 4 bolts.

Two J-type pickups with Ken Smith logo on the cover are equipped with the original active circuit with master volume, balancer, and 2-band EQ controls.

It features Ken Smith's signature clear, high-fidelity tone, and the 2-band EQ and J-type pickup configuration allows for a wide range of tones, from tight, punchy lows to sparkling highs.

Whether slapping, finger picking, or picking, a solid core tone can be obtained, making this guitar suitable for any genre of music.
The overall paint is noticeably cloudy, and there are numerous scratches and dents scattered throughout.
The neck is set up at a slightly higher string height than the standard height due to the truss rod being tightened, but there is no sound clogging or fret chattering.
One screw on the back panel is missing.
The instrument has been maintained and cleaned at our repair center.

Product Rank: B+: Some scratches, but no problem in normal use.

Country of manufacture: Japan
Case: Original soft case
Weight: 3.83kg
Truss Rod: Neck slightly wavy and high at rod limit
Fretboard: No problem, sufficient fretboard height.
String Height: Bass string side: 3.0mm above 12th fret
String height on treble string side: 2.4mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.2mm
SCALE: 864mm (34")
RADIUS: 381mm (15")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.