USED Gibson USA / Les Paul Custom 1989 Ebony [12]

This is a 1989 Les Paul Custom with Duncan pickups replaced.
Royal style with maple top/mahogany back, mahogany neck, and ebony fingerboard.

This is the era when heavyweight bodies were adopted as the demand for HR/HM increased.
The weight of this guitar is 4.39kg, which is a little light for Les Paul Custom of this era, but it is characterized by its firm weight, tight bass and extended treble, and it maintains its sound profile even with distortion sound.

Both front and rear pickups have been replaced with Duncan pickups, but the model name of the front pickups is unknown, and the rear pickups are SH-1 (59model).

Although it is less than 40 years old, it has a vintage look with fine weather checks all over the paint and yellowing of the topcoat.
There are paint chips on both sides of the head tip, and large and small paint chips are scattered on the neck grip and neck joint heel.
There are sticker marks on the back of the body, and there are many fine weather checks all over the paint and the binding has many cracks.
The truss rod is not fully tightened, but the set-up has been done so that there is no problem in playing the instrument as it is now.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
The original hard case is included, but the dial lock is damaged.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: 81459571
Year of manufacture: 1989
Country of manufacture: USA
Case: Original hard case (dial lock broken)
Weight: 4.39kg
Truss Rod: Neck is fine at the limit of the rod.
Fret Remaining: Still can be cut, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String Height: 1.5mm above the 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.