USED Paul Reed Smith (PRS) / Singlecut 2007 Black Cherry [12]

2007 Single Cut is now in stock.
This single cut shape model is currently only available in the 40th Anniversary McCarty SC56 lineup.

It has a thicker body than the flagship CUSTOM model, a wide fat neck shape, a bridge with an integrated stop tailpiece, non-locking Cruson type pegs, and a larger ground plane on the 6th string side, which gives it the thickest and thickest sound in the PRS lineup. The pickups were developed especially for this model.

Two #7 pickups, developed especially for this model, are mounted on the instrument, providing a good sense of power, and can handle a wide range of sounds from clean to distorted.

The bridge has been replaced with a ResoMax NW2, which allows octave adjustment for each string (original parts are missing).

This is a very rare used singlecut from the mid-2000s, so please take advantage of this opportunity!
The paint on the top edge of the body is slightly faded.
There are some paint peeling and dents around the bridge studs.
There are also some minor scratches and dings scattered throughout, and the hardware is dull.
The strap pins and bridge have been replaced, and there is a slight feeling of use, but each part has been maintained and cleaned at our repair center, so playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 7 115301
Year of manufacture: 2007
Country of manufacture: USA
Case: Original hard case
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.4mm
Neck thickness near 12th fret: 24.5mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.