USED Fender / 1974 Mustang B-Neck Blue [12]

We have a vintage 1974 Mustang in stock.
We have determined that it was made in 1974 based on the serial number, head logo, front pickup date (7430), and other features.
Since it was released as a student model, the short scale, small body, slant-mounted covered single coil pickups with on/off/phase lever switch, dynamic vibrato tremolo unit, and other unique specs make it a one-of-a-kind mustang with a unique sound. The unique mustang sound is created by such unique specs as a slant-mounted single-coil pickup, on/off/phase lever switch, and dynamic vibrato tremolo unit.
The rear pickup has been replaced with an unknown model, and the jack has also been replaced.
The electrical pots are illegible, but are believed to be original.
The nut and frets are also original, and although the frets are a little low, the guitar is still in playable condition.

The paint on the head top and sides is discolored, and there are minor weather checks and paint peeling.
There are many scratches and dents scattered throughout the neck and body, and there is a sense of use commensurate with the age of the instrument.
The strap pin has been replaced with a new one, but the original is still included.
Although there is a sense of use, each part has been maintained and cleaned at our repair center, and playability is good.

Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: 305217
Year of manufacture: 1974
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.45kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fretboard: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.0mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, neck ironing, electrical repair (wire breakage correction), strap pin replacement, peg deformation and operation correction, bridge fixing screw loosening correction

Specifications: (1)

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
305217

Year of manufacture
1974

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
3.45kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret remaining
Still good for cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
40.8mm

Neck thickness near 1st fret
22.0mm

Neck thickness near 12th fret
24.0mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, neck ironing, electrical repair (wire breakage correction), strap pin x2 replacement, peg deformation, operation correction, bridge fixing screw loosening correction