YAMAHA / PACIFICA PROFESSIONAL PACP12SWH / Shell White [20]

1. Deeper top and back contours for a greater sense of unity when playing
The back contour has been deepened to fit more comfortably when holding the guitar, and the top contour (where the elbow rests) has been rounded instead of a straight contour to improve the fit against the arm.

2. Slim C shape for modern play
The Slim C neck shape was adopted to accommodate a wide range of styles, from lead to backing, based on feedback from many players in Japan and the U.S. The "Standard Plus" has a 42mm neck, and the "Standard Plus" has a 42mm neck. The "Standard Plus" features a 42.00mm TUSQ nut. The roll-off processing on the side of the fingerboard is highly precise, and the neck thickness is set at 20.00mm thick at the 1st fret position and 22.4mm thick at the 12th fret position. Both low chords and power chords are stress-free and highly playable.

Compound Radius is used for the Professional Series
Compound radius is a high-precision conical fingerboard finish that gradually increases the radius of the fingerboard from low to high position (gradual radius = round at low position and flatter toward high position). This design also prevents choking at the high position, and is recommended for those who set the string height low.

3. Hi-Fi pickup "Reflectone" completed in cooperation with Rupert Neve Design
This pickup was developed and manufactured by Yamaha in collaboration with Rupert Neve Design, a company founded by Rupert Neve, who has produced many famous pro audio pickups. By using Alnico V magnets and researching and developing the number of turns, winding method, and height of the pole piece from scratch, Yamaha has created an extremely well-balanced pickup that combines the power of low frequencies with "sparkling" high frequencies. 4.

4. acoustic analysis technology by Acoustic Design
Acoustic Design" is a design process that utilizes Yamaha's unique acoustic analysis and 3D modeling. The following processing is applied to reproduce tight and clear bass sound by adjusting the frequency of vibration in the low range and emphasizing the mid range through "coupled vibration reinforcement" of the body and neck.
? Slit" processing on the body
? Head and neck "lengthening
? Control cavity cutting design improvement (NC router cutting)

I.R.A. (Initial Response Acceleration)
I.R.A. is a technology that eliminates stress between the paint and the wood by giving the finished guitar a vibration that is unique to that guitar. The guitar is made to look as if it has been played for many years.
Serial: IKO035E
Weight: 3.86kg
Accessories：wooden hard case

Specification
Body ALDER 2PCS (center)
Neck MAPLE / CUSTOM TINTED SATIN FINISH
Fingerboard ROSEWOOD
Scale 648mm (common)
Radius Compound Radius / 254-355.6mm(10"-14")
Neck Profile SLIM C SHAPE
Neck Thickness 1st Fret 20.0mm / 12th Fret 22.4mm
Fret MEDIUM / STAINLESS STEEL
Rod WHEEL TRUSS ROD
Nut Graph Tech TUSQ 42.0mm
Pickups [Reflectone] Collaborated P.U. with YAMAHA x Rupert Neve Designs / S-S-H
Controls Volume & Tone / High Pass Vol & Coil Tap / 5-way SW
Bridge Gotoh 510T-FE1 (2 point support, 10.8mm pitch between strings)
Tuners Gotoh SG381 MG-T (locking type)

specs

Country of origin
Made in Japan

Body
ALDER 2PCS (Center)

Neck
MAPLE / CUSTOM TINTED SATIN FINISH

Fingerboard
ROSEWOOD

SCALE
648mm (common)

RADIUS
Compound radius / 254-355.6mm(10"-14")

Neck Profile
SLIM C SHAPE

Neck Thickness
1st Fret 20.0mm / 12th Fret 22.4mm

Fret Size
MEDIUM / STAINLESS STEEL

Rod
WHEEL TRUSS ROD

Nut
Graph Tech TUSQ 42.0mm

Pickups
[Reflectone] Collaborated P.U. with YAMAHA x Rupert Neve Designs / S-S-H

Controls
Volume & Tone / High Pass Vol & Coil Tap / 5-way SW

Bridge
Gotoh 510T-FE1 (2-point support, 10.8mm pitch between strings)

Tuner
Gotoh SG381 MG-T (Locking type)

Others
I.R.A. (Initial Response Acceleration) treatment

Case
Hard case