USED YAMAHA Yamaha / Super Axe SA-700 Persimmon Red [20]

The YAMAHA SA700 Super Axe is a famous Japanese semi-acoustic instrument.
This model was manufactured and sold from 1977 to 1983, and is still very popular among fans as a Japanese vintage model with its solid, careful, and solid construction and finish that can only be achieved by domestic production.
The body is made of birch and beech laminate, the center block is made of spruce and maple, the neck is made of mahogany, and the fingerboard is made of rosewood.
Both pickups are not listed, so we do not know the details.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and binding repaired, so it is in good playing condition.
Due to the pickup selector, F volume, and rear pickup being defective, the pickups have been replaced with no-brand substitutes.

There are some parts that have some scuffs and rust, and overall there are scratches, dents, and other signs of use.
The case is peeling and sore from age, and rust is noticeable on the metal fittings.

Item rank: B+ (Good)

Year of manufacture: Made in 1981
Truss Rod ： Nearly fully tightened
Fretboard: 60-70%.
Accessories ： Hard Case / Genuine
Country of Origin ： Japan
Weight ： 3.94kg
Serial ： 028612

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod (not much left)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|24.8mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, binding repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
20.4mm

Neck Thickness (near 12th fret)
24.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, binding repair