USED YAMAHA Yamaha / MG-MII NEON [20]

YAMAHA's MG-MII signature model for Takahiro Matsumoto of B'z.
The MG-MII became popular in the early 90's when Mr. Matsumoto used it, and its lightweight, small double cutaway body is suitable for intense live action, and its high playing performance up to the high position is also attractive.
Although he rarely uses it anymore, it is a must-see electric guitar for fans with many live videos and sound recordings and memories that come back to life.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, and electrical repair have been done.
The neck has a high neck twist and waviness symptom, and has been adjusted by fret adjustment.
The wood at the neck pocket end is cracked, and a maple veneer has been attached with epoxy glue to secure its strength.

There is rust and scuffing on parts, and there are numerous paint cracks and dents on the body back and neck joint.
There are also many other minor scratches and dents throughout the instrument, giving it a feeling of use.

Item rank: B (average)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Soft case / Non-genuine arm
Country of Origin ： JAPAN
Weight ： 3.56kg
Serial ： 2N07084

Truss rod: No problem, confirmed up to 60 degrees to the left and right (torsional waviness)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.2mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|22.0mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.2mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
22.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair