USED Fender USA Fender / Jeff Beck Stratocaster Lace Sensor Vintage White [20]

One of the three great guitarists, "Jeff Beck" signature Stratocaster. This is an early specification Stratocaster made in 1998.
It has Sperzel trim lock tuners, Wilkinson roller nut, and a fat neck grip that makes you squeal when you first touch it.
The neck can be played with a firm grip, and a pleasant vibration can be felt.
The "Race Sensor" pickups, which are different from the current model, are placed side by side in the bridge position and can be coil-tapped with the switch located between the TONE knobs, which allows for a wide range of sounds.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.
The truss rod is fully tightened and the neck is twisted, but the string height is standard height, so it is sold as is.

The back panel is missing.
There are many small dents with paint chips around the head.
There are also some minor scratches and dings.

Item rank: B (average)

Year of manufacture: 1998
Truss Rod ： Tightened
Fretboard: 60-70% full
Accessories: Soft case / Non-genuine arm
Country of Origin ： USA
Weight ： 3.71kg
Serial ： SN8952658

Truss Rod: Defective, neck warped at rod limit
Fretboard: No problem, sufficient fretboard height.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|22.6mm
Neck thickness (near 12th fret)|25.0mm
SCALE|648mm (25.5")
RADIUS|254mm (10")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Defective, neck warped at rod limit

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
22.6mm

Neck Thickness (near 12th fret)
25.0mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing