USED Fender USA Fender / American Vintage II 1972 Telecaster Thinline 3-Color Sunburst [20]

The American Vintage II 1972 Telecaster Thinline is an excellent reproduction of the quintessential tone and feel of the original model produced at the time.
It features a 1972 "C" shaped maple neck with vintage tall frets and a 7.25" radius fretboard that is reminiscent of the playability of the instrument as it was in 1972.
It is equipped with Wdie Range humbuckers, which bring back the CuNiFe magnets that had not been produced since 1981.
Features include Bullet style truss rod nut located on the head side, 3-bolt neck plate with Micro-Tilt, F logo tuners, 6-saddle string-through-body hardtail bridge with bent steel saddles.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair since we received it, so it is in good playing condition.

There is one paint crack on the cutaway part on the back of the body, but other than that, it is in good condition with only minor scratches.

Item rank: B+ (Good)

Year of manufacture: Made in 2023
Truss rod: There is enough room.
Fret: 80% or more
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.43kg
Serial ： V11934

Truss Rod: No problem, confirmed to 60 degrees left and right
Fret remainder: No problem, same condition as new
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|24.2mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, same condition as new

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.0mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
24.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair