USED Music Man Music Man / Steve Morse Y2D Hardtail Black Burst [20]

Steve Morse's signature model Y2D.
The combination of beautifully elegant figured maple, distinctive poplar tonewoods, custom Dimarzio pickups, and a simple, intuitive pickup arrangement provide the feel and playability you expect from a high-quality instrument.
The strap pins have been replaced with embedded locking pins.

* The instrument has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised after our arrival, so it is in good playing condition.

There is a small clear paint crack at the neck joint and many dents with fine paint scratches on the top end of the body.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2013
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine lock pin
Country of Origin ： USA
Weight ： 3.50kg
Serial ： G65673

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.5mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness (near 12th fret)|22.4mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
41.5mm

Neck Thickness (near 1st fret)
20.3mm

Neck Thickness (near 12th fret)
22.4mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing