USED Fender USA Fender / American Standard B-Bender Telecaster Black [20]

American Standard B-Bender Telecaster was released in 1996.
This is the first year of the American Standard, a highly popular standard Telecaster model equipped with the B-bender.
The B-bender is a mechanism that raises the pitch of the Telecaster's B string (2nd string) all the way up to C#. When the guitar is hung on the shoulder and the neck is pushed down, the strap lifts the strap button upward, activating the lever system and raising the pitch of the B string.

* The guitar has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted since we received it, so it is in good playing condition.

There are several dents with paint chips on the body corners, and overall there are scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 1996
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.50kg
Serial ： N6176432

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|22.2mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
22.2mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment