USED Fender Japan Fender Japan / TL62B-75TX 3 Tone Sunburst [20]

This Custom Telecaster 62 model features body binding.
Based on an alder body with rosewood fingerboard and maple neck, it is equipped with Fender Texas pickups.
It has a pleasant sound with a crisp attack while also producing a good midrange.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair have been done.
The neck is in good playing condition, as it has a little bit of waviness and high spring, and the frets have been adjusted by fret adjustment.

There are some parts have some chinks and the tone knob has some chrome peeling.
There is a small paint chip on the side of the pickguard.
There are other minor scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2002-2004
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.4kg
Serial ： CIJ P021205

Truss Rod : No problem.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|20.6mm
Neck thickness (near 12th fret)|22.9mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.0mm

Neck Thickness (near 1st fret)
20.6mm

Neck Thickness (near 12th fret)
22.9mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair