USED Vanzandt Vanzandt / TLV-R1 White Blonde [20]

This is a regular "neo-vintage" VanZandt model based on an ash/maple '50s style telecatcher.
The use of tonewoods with excellent acoustic characteristics, the rigid neck, handmade vintage + α pickups, and the careful assembly process by our elite staff based on the characteristics of each individual instrument, all contribute to VanZandt's pursuit of the ideal sound and vintage charm that can only be found in vintage instruments. The wide range of tone by securing a frequency band that is both necessary and practical, and the design based on the high playability required in the modern age, while pursuing the ideal sound that VanZandt seeks, the charm that can only be found in vintage guitars, are produced to satisfy the desires of the player side.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, fretted, and electrical repairs have been done, so it is in good playing condition.

There is a hole next to the strap pin at the end of the body.
There are many other small dents with paint chips, and minor scratches and other signs of use.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories: Hard Case / Non-Genuine
Country of Origin ： JAPAN
Weight ： 3.71kg
Serial ： 4510

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fretboard: No problem, enough fretboard height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.4mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.6mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
Please note that we try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.4mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.6mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair