USED YAMAHA Yamaha / SF7000 Antique Satin [20]

This is the "SF7000", which reigned as the top model of the SF series, created in 1980 as a rival model of the famous "SG", a representative Yamaha electric guitar.
The serial number indicates that it was made in 1980.
The body is in between the size of Strat and SG, and is made of maple top and mahogany back, and has a unique construction called "T-Cross" which is made of maple and mahogany interlocked in a T-shape.
The pickups are the original alnico type, producing a warm and dry tone, and a bi-sound (coil tap) switch can be activated by pushing the tone pot, enabling a wide range of sound makeup.
This is one that you can feel Yamaha's attention to detail, which is typical of the top-of-the-line models.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The plating on the gold parts has some spots and fading.
Two knob decorations are missing, and there are scratches and dents throughout.

Item rank: B+ (Good)

Year of manufacture: 1980
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.92kg
Serial ： 017750

Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|21.8mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.8mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
21.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment