USED Fender USA Fender / VG Stratcaster 3-Color Sunburst [20]

The VG Startocaster was born in 2007 as a collaboration between Fender and Roland, and was equipped with Roland's COSM modeling technology.
It is the first VG Startocaster, which later led to the Mexican-made G-5.
It can be used as a regular Stratocaster, a Telecaster, a humbucker, an acoustic guitar, a 12-string guitar, or even an odd-tuning guitar, all in one guitar.
In addition, it can express tones such as wide range and bright humbuckers that cannot be obtained with conventional electric guitars.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted after our arrival, so it is in good playing condition.

Arm is missing.
There is a sticker burn on the pickguard.
There is a ding with a small paint dent on the contour section, and other minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: 2007
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.53kg
Serial ： Z7033587

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
23.0mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment