USED Fender Mexico Fender Mexico / Blacktop Stratocaster HSH Black [20]

A unique style Stratocaster with an HSH arrangement and a Telecaster pickup in the center.
It is equipped with Blacktop Humbucking Pickups on the front and rear, giving it a vintage tone that has a Fender-like sound without being too high-gain.
The center pickup is a Blacktop Single-Coil Tele pickup, giving this Stratocaster a wide range of sound and making it suitable for a variety of uses.
The pickguard, backplate, tremolo spring, and wiring material are thicker cross-wire type, and the capacitor has been replaced with a vitaminQ DEL RITMO0.022 on the rear side and a gudeman .015 on the front side.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair, so it is in good playing condition.

Other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2014
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Gig bag / Genuine arm
Country of Origin ： Mexico
Weight ： 3.77kg
Serial ： MX14512347

Truss Rod: No problem.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.8mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|22.2mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.8mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
22.2mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair