USED Aria Pro II Aria Pro Two / RSB-1500/M Natural [20]

RSB-1500/M with 24F maple fingerboard and active circuit.
The cutaway on the first string side is deep, allowing smooth playing at high frets.
The Aria original PU, which is characterized by its deep and clear low frequency, is combined with an active circuit to produce powerful low tones.
The bright quilted maple top and Avalon position markings give it a look with a strong presence.

* After our arrival, it has been cleaned, rod adjusted, octave adjusted, string height adjusted, shim under the neck adjusted, and saddle screws replaced, so it is in good playing condition.

There are some parts have some chinks and minor rust, and other minor scratches and small dents, so it is in good condition.

Item rank : B+ (Good)

Year of manufacture: 2014
Truss rod : Plenty of room
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 4.20kg
Serial ： 14208051

Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|40.0mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|24.0mm
SCALE|864mm (34")
RADIUS|254mm (10")
Repair and maintenance parts|cleaning, rod adjustment, octave adjustment, string height adjustment, shim adjustment under neck, saddle screw replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
40.0mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
24.0mm

Scale
864mm (34")

RADIUS
254mm (10")

Repair and maintenance
Cleaning, rod adjustment, octave adjustment, string height adjustment, shim adjustment under neck, saddle screw replacement