USED ELK ELK / TIARA Custom Guitar Sunburst [20]

TIARA was produced by ELK in the 1970s.
It has a mable top and mahogany back body, a maple 3-piece neck with thinly shaped and rounded edges for an easy grip, and a rosewood fingerboard with zero frets and unique inlays.
The double cutaway body weighs less than 4 kg, making it easy to handle.
The part of the first string through-hole has been replaced.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment have been done.
The neck is twisted and has a high spring, and the frets have been adjusted by fret adjustment, but the frets are very low.

There are some parts that are stained, and there are some minor scratches and dents overall.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： Japan
Weight ： 3.97kg
Serial ： 75013

Truss Rod : No problem, confirmed up to 60 degrees to the left and right.
Fret remainder is defective and needs to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness (near 12th fret)|19.9mm
SCALE|628mm (24.75")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
43.5mm

Neck Thickness (near 1st fret)
20.3mm

Neck Thickness (near 12th fret)
19.9mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment