USED Gibson USA Gibson / 20th Anniversary Les Paul Custom Polaris White [20]

This is a 20th anniversary model with TWENTIETH ANNIVERSARY inlay on the 12F.
Wood materials include a pancake body maple top, 3-piece maple neck, and ebony fingerboard as per this year's specifications.
The pegs are Grover 102G with original keystone buttons and a wired ABR-1 bridge.
The frets and nut are also kept original.
The pot dates are oxidized and cannot be read, but there is no evidence that they have been replaced, and all four are in the same condition, so they are considered original.
The front pickups are probably sticker numbered PAF, but the sticker has been removed. The rear pickups are PAT NO. 2.737.842, and the rear pickups are PAT NO. 2.737.842.
The switch knob is cracked and has been replaced.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed, and parts replaced, so it is in good playing condition.

The strap pin has been replaced.
There are some chinks and plating rust on the gold parts, and the paint is cracked at the neck joint.
There is a buckle scratch on the body back and a sticker mark.
There is a ding on the top of the head with a chip in the wood.
There are other scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 1974
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.80kg
Serial ： 558913

Truss Rod : No problem.
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|26.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, parts replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.3mm

Neck Thickness (near 1st fret)
21.1mm

Neck Thickness (near 12th fret)
26.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, parts replacement