USED Aria Pro II Aria Pro Two / PE-R80 Antique Brown [20]

This is the Aria Pro II "PE-R80" made in 1984.
This model represented the Aria Pro II at that time, and was a popular model that broke out through the use of Mr. Katsumi Watanabe and Mr. Masaki Matsubara, etc. The body is 3P maple/mahogany/maple, the neck is maple, and the fingerboard is rosewood.
Body is maple/mahogany/maple 3P, neck is maple, fingerboard is rosewood, pickups are CLASSIC POWER x 2, medium scale.
Both top and back are arched, and the neck joint has a deep heel-less cut, making this model very easy to play in the high position.
Each control is equipped with a tap switch, allowing for a wide range of sound creation.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and neck corrected, so it is in good playing condition.

There are some gold parts that have some chinks and peeling of plating.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 1984
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Gig bag/not genuine
Country of Origin ： Japan
Weight ： 4.15kg
Serial ： 4123257

Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.2mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|23.1mm
SCALE|628mm (24.75")
RADIUS|254mm (10")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, neck correction

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
Please note that we try to delete the product information as soon as possible, but not necessarily in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.2mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
23.1mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, neck correction