USED Fender USA Fender / 1966 Mustang Red [20]

Neck Date: Neck 6-2-66/Bridge 6-16-66 (both made in 1966), P.U. Date: Volume AUD 304-6618/Tone AUD 304-6618 (both made in 1966).
The F-key pegs are also original, with the shaft visible through the cover.
From the latter half of 1966, the "OFFSET" decal was discontinued, and the dynamic vibrato on the bridge was also stamped with a patent number, making this an item with rare specifications unique to the transitional period.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.
The frets are quite low, but there is no sound jamming.

There are weather checks throughout.
The back of the neck has been satin-finished.
There are numerous dents with paint chips on the corners of the body and neck shorts, and overall there are scratches and dents.

Item rank: B+ (Good)

Year of manufacture: 1966
Truss rod: There is enough room.
Fretboard : Less than 50%I
Accessories ： Hard case / Non genuine arm
Country of Origin ： USA
Weight ： 3.34kg
Serial ： 141905

Truss Rod : No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret rest is defective and needs to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.6mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|23.3mm
SCALE|610mm (24")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
41.6mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
23.3mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, nut adjustment