USED YAMAHA Yamaha / CPX1200 Vintage Sunburst [20]

Deep-body & cutaway CPX body with newly developed SRT pickup system as of 2010.
Newly developed "SRT" system that reproduces even the shimmering air of a recording studio, 3 types of microphones and 2 types of microphone setting sounds selectable, built-in A.F.R. ( Auto Feedback Reduction ) to suppress feedback.
All solid body.

* After arrival at our company, the guitar has been cleaned, strings replaced, rods adjusted, string height adjusted, and rubbed together.
The neck has a slight torsion and waviness symptom, and has been adjusted by fret adjustment.
The saddle is integrated with the piezo PU, and the string height on the 6th string side is set slightly higher.

There is a ding mark on the top of the body under the pickguard.
There are also some dents and scratches on the top of the body, and the gold parts are stained.

Item rank: B+ (Good)

Year of manufacture: Made in 2010
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： CHINA
Weight ： 2.16kg
Serial ： HQM211023

Truss Rod: No problem (slight waviness, little remaining)
Fret height is sufficient.
String height(bass string side)|3.0mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|42.9mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|-
SCALE|650mm (25.59")
RADIUS|356mm (14")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight waviness, little remaining)

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
3.0mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut width
42.9mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
650mm (25.59")

RADIUS
356mm (14")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment