USED B.C.Rich B.C.Rich / Mockingbird ST Trans Red [20]

Beautiful quilted maple top and mahogany back body with through neck. The through-neck design makes it easy to play in the high position and delivers rich sustain.
Powerful sounding Duncan design PU with coil tap switch, phase switch, and Varitone knob (5-way tone control) for a variety of sound variations.
Ebony fingerboard and 24 jumbo frets.

There is a large amount of line scratches on the center of the body top from picking, and there is a line scratch from a buckle near the center of the body back.
There are no corner chips characteristic of deformed guitars, and there are overall signs of use such as line scratches and small dents.

After receiving the guitar, it has undergone cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, and electrical repairs.

Item rank: B+ (Good)

Year of manufacture: 2008
Truss rod: There is enough room.
Fretboard : 60～70
Accessories ： Soft case / Genuine arm
Country of Origin ： Korea
Weight ： 4.14kg
Serial ： G08120307

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|20.1mm
Neck thickness (near 12th fret)|21.7mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 43.7mm

Neck thickness(near 1st fret)20.1mm

Neck thickness (near 12th fret)21.7mm

Scale628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair