USED Gibson USA Gibson / Les Paul Studio Ebony [20]

The Les Paul Studio is a simple design.
Compared to the Les Paul Standard, the binding (lines) around the body and fingerboard, the pickup covers were omitted, and the position marks were made with simple dots to keep the Les Paul sound intact while keeping costs down.

The pickguard is missing.
Knobs, front and rear pots have been replaced, and front condenser has been replaced.
There are numerous dents on the back of the body due to buckling, and there is a ding with paint cracking on the bottom of the back.
There is a ding with paint cracking near the rear volume area, and some parts have some cracks and minor rust.
There are also some other signs of use such as scratches and small dents.

After receiving the instrument, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repairs were performed.

Item rank: B+ (Good)

Year of manufacture: 2000
Truss rod: There is enough room.
Fretboard : 60～70
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.10kg
Serial ： 00500309

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fretboard: No problem, enough fretboard height
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|20.3mm
Neck thickness (near 12th fret)|24.3mm
SCALE|624mm (24.56")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 43.1mm

Neck thickness(near 1st fret)20.3mm

Neck thickness (near 12th fret)24.3mm

SCALE624mm (24.56")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair