USED Bizen Works Bizen / BURNED STD [20]

Bizen Works was launched in 2016 by former ZEMAITIS Custom Shop factory manager Yukihiro Sakamoto.
The specs are the royal road with a maple top, mahogany back, mahogany neck, and dark rosewood fretboard.
The neck shape is a V-shape with a good thickness, created exclusively for this BURNED STD.
P.U. is equipped with Bizen Works original Bizen Vintage custom humbucker.

There is a small ding on the back end of the body with paint chips.
There are some parts with some cracks, and the rear tone knob is cracked inside.
There are other minor scratches and dings.

After receiving the instrument, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment have been performed.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard : 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： Japan
Weight ： 4.08kg
Serial ： 230424

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|23.5mm
Neck thickness (near 12th fret)|25.0mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.