Skip to product information
1 of 16

USED FENDER MADE IN JAPAN / 2024 Collection MIJ Hybrid II Stratocaster HSH Vintage Natural [20]

Serial Number : JD23026273

[SN JD23026273] USED FENDER MADE IN JAPAN / 2024 Collection MIJ Hybrid II Stratocaster HSH Vintage Natural [20]

Item Code: 20-2800005153118
Condition: USED
Store: [20] fukuoka

Regular price ¥112,320 JPY
Regular price Sale price ¥112,320 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
Alder body, maple neck, rosewood fingerboard—the classic configuration.
Equipped with a newly designed Hybrid II Custom Voiced Humbucking pickup, balanced with the Hybrid II Custom Voiced Single Coil pickup, and featuring a two-point tremolo system with vintage-style saddles.
Vintage locking tuners, a Modern "C" shape neck with a satin finish, a 9.5-inch radius fingerboard, and narrow tall frets ensure smooth playability.

The parts show slight discoloration, and there are small dents with paint cracks on the lower body back and body sides. Additionally, there are minor scratches and small dents throughout.

Condition Grade: B+: Some imperfections present, but does not affect normal use.

Serial Number: JD23026273
Year of Manufacture: 2023
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.38kg
Truss Rod: Note: Rod tested to 60 degrees left and right with no issues (some adjustment remaining)
Fret Wear: No issues; sufficient fret height remains
String Height (Low Strings): 2.0mm above 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 41.6mm
Neck Thickness Near 1st Fret: 20.5mm
Neck Thickness Near 12th Fret: 23.1mm
Scale length: 648mm (25.5")
Fingerboard radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Fret Leveling, Nut Slot Correction

* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.

* Any measurements listed for the truss rod, remaining fret depth, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.

* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
アルダーボディ、メイプルネック、ローズウッド指板と王道仕様。
Hybrid II Custom Voiced Single Coilピックアップとのバランスを重視した新設計のHybrid II Custom Voiced Humbuckingピックアップを装備し、ヴィンテージスタイルサドル付きの2点支持トレモロシステムを搭載。
ヴィンテージロッキングチューナー、Modern "C"シェイプにサテンフィニッシュのネック、9.5インチラジアスの指板とナロートールフレットがスムーズなプレイヤビリティを誇ります。

パーツに若干くすみがあり、ボディバック下部やボディサイドに塗装割れを伴う小さな打痕がございますが、その他全体的に細かい線傷や小さな打痕がございます。

商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: JD23026273
製造年: 2023
製造国: 日本
ケース: 非純正ソフトケース
付属品: アーム
重量: 3.38kg
トラスロッド: 注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 41.6mm
ネック厚1フレット付近: 20.5mm
ネック厚12フレット付近: 23.1mm
スケール: 648mm (25.5")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ・ナット溝修正

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4