USED Paul Reed Smith (PRS) / 2016 SE Custom 24 Scarlet Red [03]

The 2016 Paul Reed Smith (PRS) / SE Custom 24 is now in stock, pre-owned!

* From the manufacturer's website below
Since its introduction in 2001, the SE series of guitars has established a solid position in the market share of the same price range and has grown to become one of the mainstays of the PRS lineup.

The SE Custom 24, a favorite of many musicians, features a mahogany back, maple top body, wide thin-curved maple neck, rosewood fingerboard, bird inlays, and a PRS-designed tremolo bridge.

It is equipped with an 85/15 "S" with volume, push/pull type tone control, and a 3-way blade pickup selector for a clear and beautiful sound from low to high notes.

The SE Custom 24 is a classic yet modern, highly durable, and versatile tone.
Condition.
There are some minor scuffs and scratches on the surface, which are commensurate with the age of the instrument. The neck, frets, and truss rod are all in good playing condition. Vol knob, Tone knob, PU selector switch, and strap pin have been replaced.
The Vol knob, Tone knob, PU selector SW, and strap pin have been replaced.

* This item is currently stored in our warehouse and is not on display in our store.
If you would like to try it out, please feel free to ask one of our staff members in your area.
Item Rank: B+: Some scratches, but no problem for normal use.

Serial number: Q13112
Year of manufacture: 2016
Country of manufacture: Korea
Case: Soft case (non-genuine) * Stains
Accessories: None * Arm missing
Weight: 3.88kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 21.9mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment/fine-tuning

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number Q13112

Year of manufacture 2016

Country of manufactureSouth Korea

CaseSoft case (non-genuine) * Stained

No accessories * Arm missing

Weight 3.88kg

Truss rod no problemRod checked up to 60 degrees to the left and right, no problem

No fret rest problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.4mm

Neck thickness near 1st fret 20.4mm

Neck thickness near 12th fret: 21.9mm

SCALE 635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment/, mortise and tenon adjustment