USED Fender Custom Shop / 1956 Stratocaster NOS 2000 Black [12]

A beautiful Fender Custom Shop 1956 Stratocaster with a flame maple neck is now in stock.
This is a Custom Shop Strat that reproduces the 1956 specifications, and the certificate and neck date indicate that it was made in 2000.

It has an alder body and a one-piece maple neck with a soft V. It is a reproduction of the specifications from mid-1956 to 1957.

The guitar is equipped with the original Custom Shop pickups, and the fretboard radius is 7.25", which is a vintage spec, allowing for the same playing feel as in those days.
There are weather checks and paint pulls from the head to the entire neck, paint peeling by the 6th string peg, and partial darkening on the head back.
There is a large ding on the neck grip at the 4th fret and numerous paint chips on the fingerboard edge on the 1st string side.
There are paint cracks on the top and back of the body, and the pickguard is discolored and distorted due to age.
There are also some minor scratches and dings scattered throughout, and the hardware is dull.
Although there is a sense of use, each part has been maintained and cleaned at our repair center, and playability is good.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: R11114
Year of manufacture: 2000
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity, arms, bridge cover
Weight: 3.76kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard side burrs fixed, strap pins x2 replaced

* There are some scratches, dents, etc. that are hard to see in the pictures or are not shown in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
R11114

Year of manufacture
2000

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Certificate, Arm, Bridge cover

Weight
3.76kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.4mm

Neck thickness near 1st fret
22.5mm

Neck thickness near 12th fret
24.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard side burr correction, replacement of 2 strap pins