USED PEAVEY / Wolfgang USA Edward Van Halen Signature Trans Amber [12]

PEAVEY's Eddie Van Halen Signature Model, made in USA, Trans Amber color is now in stock.
After MUSICMAN, the Van Halen model was produced by PEAVEY, a global musical instrument and audio equipment manufacturer, and features looks and specs inherited from later EVH brand guitars.

Compact headstock with 3:3 peg layout, asymmetrical shape and comfortable grip, bird's eye maple neck/fingerboard with 22 frets.

The basswood body has a flat, no-nonsense sound quality and is equipped with the original 2 humbucker pickups, and the FRT-licensed locking tremolo has D-tuners as standard.

The toggle switch pickup selector is set to the rear pickup on the upper side and the front pickup on the lower side to prevent malfunctions when tapping, but the toggle switch on this model has been changed to the upper side/front pickup and lower side/rear pickup. This guitar has a front pickup on the upper side and a rear pickup on the lower side.
The neck and fingerboard are slightly darkened, and there are some minor scratches and dings on the body.
The toggle switch and jack have been replaced, but the original parts are included.
Although it is slightly used, each part has been maintained and cleaned at our repair center, and playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 91007290
Year of manufacture: 1998
Country of manufacture: USA
Case: Original hard case
Accessories: Arm, Original Jack, Original Switch, Fret Guard
Weight: 3.63kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 91007290

Year of manufacture 1998

Country of manufactureUnited States

CaseOriginal hard case

AccessoriesArm, original jack, original switch, fret guard

Weight3.63kg

No truss rod problemNo truss rod problem, confirmed up to 60 degrees to the left and right

Fret RemainingNo problem, sufficient fret height

String height 2.0mm above 12th fret on bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.7mm

Neck thickness near the 1st fret: 21.1mm

Neck thickness near 12th fret 24.0mm

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment