USED PAUL REED SMITH / 2005 Custom 22 Moon Inlay Wide Fat Neck Royal Blue [03]

Used "Custom 22 Moon Inray Royal Blue" with moon inlay, made in 2005, is in stock!

Custom 22
The Custom 22 is one of the most popular PRS models with a richer and more musical sound than the Custom 24 due to the two less frets than the Custom 24 and the difference of the built-in and PU position. This is one of the classic PRS models.

Body, neck, and fingerboard
The body is a royal combination of flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Indian rosewood.

Neck Shape
Wide Fat" neck shape is adopted. Neck shape has moderate thickness and good grip without feeling hard to play.

Pickups
A set of standard "Dragon II" pickups are installed. Alnico 4 magnets are used to give McCarty's vintage feel and easy-to-handle tone with power.

Selector etc.
The versatile sound produced by the 5-way rotary can be used with a wide variety of music genres. In particular, the coil tap sound in the mix position can only be achieved with this 5-way rotary.

The PRS has been loved by guitarists of various genres for many years, and you will be able to feel the maximum performance in various fields such as live performances, sessions, and recordings.

Condition
There are many large dents on the sides of the body and back of the neck, and the paint is faded, showing signs of use commensurate with its age.
The strap pin had been replaced at the time of purchase, so we have replaced it with a genuine strap pin (new).

There are no problems with the neck, frets, truss rod, or any other playing-related conditions.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.

Product Rank: B: Fairly scratched and used, but no problem in normal use.
Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial number: 5 96182
Year of manufacture: 2005
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Arm * Lacks wrench and tag
Weight: 3.79kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 1.5mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.28mm
Neck thickness near 1st fret: 21.87mm
Neck thickness near 12th fret: 24.42mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
5 96182

Year of manufacture
2005

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
Arm * Wrench, Tag missing

Weight
3.79kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
1.5mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.28mm

Neck Thickness near 1st Fret
21.87mm

Neck thickness near 12th fret
24.42mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing