USED MARTIN / CTM 5-15M made in 2013 [03]

All mahogany body parlor guitar!

Martin Custom Shop parlor guitar with all mahogany body. No specification sheet was included, but according to the import agent's records, the top, sides and back are made of Genuine Mahogany. The scale is 21.4" (approx. 54.36cm), the nut width is about 42mm (measured), and the neck is a Mortise and Tenon joint, following the current 15 series.

There are a few small dents and light scratches, but they are not noticeable unless you hold the instrument in your hand and stare at it. The finish is satin, but there are some scratches on the back of the neck and some parts of the body. There is no significant damage.
The neck is in good condition, and the truss rod has been confirmed to operate at 60 degrees left and right. The frets have been rubbed together and are not dented, and there is about 80% height remaining. Both playability and sound are perfect.
The mahogany body gives it a warm and gentle tone, just like a parlor guitar. It is a lovely guitar that you will always want to keep by your side. Recommended for those who are looking for a small but solid guitar.
Top: Mahogany
Side & Back: Mahogany
Neck：Select Hardwood
Fingerboard & Bridge: Rosewood

Year of production: 2013
Accessories：genuine hard case
Serial：1711215

* Due to the nature of this product, we will refrain from showing or moving it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store if you have any questions.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 1711215
Year of manufacture: 2013
Country of manufacture: USA
Case: Hard Case
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.0mm above 12th fret
Nut width: 43.97mm
Neck thickness near 1st fret: 20.76mm
Neck thickness near 12th fret: 2.18mm
SCALE: 543mm (21")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, fret adjustment, string height adjustment, and deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
1711215

Year of manufacture
2013

Country of manufacture
United States of America

Case
Hard Case

Truss Rod
No problem, rod is confirmed to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.0mm above the 12th fret

Nut width
43.97mm

Neck thickness near 1st fret
20.76mm

Neck thickness near 12th fret
2.18mm

Scale
543mm (21")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, fret adjustment, string height adjustment, deburring