USED Paul Reed Smith (PRS) / 2006 Swamp Ash Special Dark Cherry Sunburst Wide Fat Neck [03]

Used "Swamp Ash Special" made in 2006, few of them are available in the used market!

Body, Neck and Fingerboard
Arched swamp ash body with figured maple neck and bolt-on joints. Figured maple fingerboard is also used.

Neck Shape
Wide Fat" neck shape is adopted. The neck shape is moderately thick and has a good grip without being hard to play.

Pickups
McCarty Bass, Seymour Duncan Vintage Rails, and McCarty Treble pickups are installed starting from the neck position.

The combination with the swamp ash body produces a hard and attack tone with good response.

Selector etc.
A 3-way toggle switch is used, and when the tone pot is pulled, the middle pickup is output, and the humbucker in the bridge position is coil-tapped.

The PRS has been a favorite of guitarists of all genres for many years, and is sure to provide maximum performance in live performances, sessions, recording, and many other fields.

Condition
The neck is tarnished and some parts are dull. There are some minor scratches and scuffs on the neck and truss rod, and the neck, frets, and truss rod are in good condition.

There are no problems with the neck, frets, truss rod, or any other playing-related conditions.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 6 SA02625
Year of manufacture: 2006
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Arm * Tag missing
Weight: 3.34kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Remaining: Fret height is present.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 23.6mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, wiring correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
6 SA02625

Year of manufacture
2006

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
Arm * Tag missing

Weight
3.34kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
Fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut Width
42.8mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
23.6mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, wiring correction