USED FENDER USA / 1977 Precision Bass Mod OWH [06]

FENDER USA 1977 Precision Bass Mod OWH is now in stock!
We have determined that it was made in 1977 from the pot date and so on.
Ash body with maple neck and fingerboard.
Pickups have been replaced with Seymour Duncan pickups.
Sunburned throughout.
Paint is chipped under the logo on the head, paint is chipped on the elbow contour, wood is chipped on the side of the fingerboard, and paint is chipped at the neck joint.
There are also some minor scratches, dings, and dulling of metal parts, and the guitar is in player's condition with a lot of signs of use.
It has been cleaned and adjusted after arrival and is in good playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: S760207
Country of manufacture: USA
Case: Hard Case
Weight: 4.28kg
Truss Rod: Note: I have checked the rod to 60 degrees to the left and right and it is fine (not much left)
Fretboard: With caution, still can withstand cutting, but the frets are low.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 22.4mm
Neck thickness near 12th fret: 24.4mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
S760207

Country of manufacture
U.S.A.

Case
Hard Case

Weight
4.28kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Remaining frets
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.5mm above 12th fret

High string side
2.0mm above the 12th fret

Nut width
41.2mm

Neck thickness near 1st fret
22.4mm

Neck thickness near 12th fret
24.4mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing