USED FENDER CUSTOM SHOP / Custom Classic Stratocaster 3 Tone Sunburst [03]

Fender Custom Shop/Custom Classic Stratocaster 3TS made in 2001 is now in stock!

2-piece alder body with bird's eye maple neck.
It is equipped with 22 medium jumbo frets and 9.5R fingerboard radius for high playability.
The neck shape is V-shape.
A two-point tremolo is installed, and the specs are a fusion of vintage and modern.

The pickups are "Fender Modern Classic" on the front and center, and "Fender Hot Classic" on the rear, each of which seems to be original.
The sound is well balanced and modern.
Controls are modern with master volume, front PU tone, center PU and rear PU tone.
The rear pickup has been re-soldered.

There are many scratches, dents, and cracks in the paint.
The case has been replaced with a non-genuine one, and the certificate of authenticity is missing.
The instrument is in good playing condition, although it has a lot of signs of use.

This is an affordable FenderCustomShop product, so please take advantage of this opportunity!
Truss rod: 90 degrees on the tightening side.
Neck condition: No problem
Fret: about 70%.
Case: Non-authentic hard case
Accessories: Arm, manuals, etc.
Serial number: CN93486
Weight: 3.71kg

There are some signs of use including scratches on the body, cracks on the joints, and dull metal parts, but this item has been cleaned, maintained, and set up by our repair department.
We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: CN93486
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.71kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.52mm
Neck thickness near 1st fret: 21.89mm
Neck thickness near 12th fret: 25.05mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
CN93486

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm

Weight
3.71kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.52mm

Neck thickness near 1st fret
21.89mm

Neck thickness near 12th fret
25.05mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing