USED Paul Reed Smith (PRS) / 2012 Stripped 58 Scarlet Sunburst Pattern Neck [03]

2012, "Stripped 58" is in stock in used condition!

Stripped 58
This model was produced in a limited edition at Experience PRS in 2011. It is a simplified version of the higher-end "SC58" model, but with no compromise in sound or playability. Neck binding and rosewood headstock veneers are omitted, but optional bird inlays are available, and the simple yet luxurious design is appealing.

Body, Neck, and Fingerboard
The body is a royal combination of flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Indian rosewood.

Neck Shape
The neck shape is the "Pattern" shape, which is used on McCarty and other guitars.

Pickups
Two "57/08" pickups are equipped, which are inspired by 1957 humbuckers and have a modern and classic sound with Alnico 2 magnets. The tone is very easy to handle.

The controls are 2Vol, 2Tone, and a 3-way toggle switch, a familiar control layout. No coil tap is provided.

The PRS has been loved by guitarists of various genres for many years, and you will be able to experience its maximum performance in various fields such as live performances, sessions, and recordings.
Condition
There are some paint chips on the head end, minor dings, scratches, and buckle marks, and the guitar shows moderate signs of use.

The neck, frets, truss rod, and other playing-related conditions are all in good condition.
The instrument has been fully adjusted and cleaned at our repair center when it arrived, so you can use it with no worries.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 12 191302
Year of manufacture: 2012
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Tags, Wrench, Manual
Weight: 3.68kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.9mm
SCALE: 622mm (24.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 12 191302

Year of manufacture 2012

Country of manufacture USA

CaseHard case (genuine)

AccessoriesTag, wrench, manual

Weight 3.68kg

No truss rod problem, rod checked up to 60 degrees left and right, no problem

Fret remainder no problem, fret height is high enough

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.1mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness near 12th fret 24.9mm

Scale 622mm (24.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment