USED FENDER USA / American Professional II Precision Bass V 3Tone Sunburst [03]

FENDER USA American Professional II Precision Bass V is in stock in used condition.
The frets have been adjusted to match and the playing condition is good enough to use without any problems.

The body back has some dents and the top has some scratches and scuffs, but the strings have been replaced with new ones and the instrument has been cleaned, maintained, and set up by our repair department.
We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: US23019014
Country of manufacture: USA
Case: Hard Case
Accessories: Key, Certificate, Manual, Wrench
Weight: 3.9kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.7mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 47.31mm
Neck thickness near 1st fret: 21.02mm
Neck thickness near 12th fret: 23.56mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105+XLB130T set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, wiring correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
US23019014

Country of manufacture
United States of America

Case
Hard Case

Accessories
Key, Certificate, Manual, Wrench

Weight
3.9kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.7mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
47.31mm

Neck thickness near 1st fret
21.02mm

Neck thickness near 12th fret
23.56mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105+XLB130T set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, wiring correction