USED Paul Reed Smith (PRS) / 2017 Wood Library McCarty Singlecut 594 Faded Whale Blue [03]

A used 2017 Wood Library McCarty Singlecut 594, an Ishibashi Instruments order model, is in stock!

McCarty 594
The McCarty 594 is a new product from Paul Reed Smith in 2016, featuring a 24.594" scale, as the name implies. What makes it so unique is its scale. The "594" in the model name comes from this unique scale, which is 24.594" (approximately 624.69 mm), shorter than the 25" scale used on many PRS guitars and a bit shorter than the 24.5" medium scale used on the SC245 and other models. This is shorter than the 25-inch scale used on most PRS guitars and a little longer than the 24.5-inch medium scale used on the SC245 and other guitars, allowing the player to experience a unique tension and sound. The body back is made of mahogany, which is slightly thicker than that of a custom instrument, and the neck is made of mahogany. The asymmetric curve shape is slightly thicker on the bass string side and a little less on the treble string side. The fingerboard is decorated with PRS's signature bird inlays, and the neck binding adds to the overall look and gives it a very high-class finish. The pickups are 58/15LT. LT" stands for Low Turns, aiming to produce a clear and warm tone by reducing the number of coil turns (number of windings). The picking nuance is also responsive, and the PRS is chosen for its ability to enjoy sound making at hand. Controls include 2 volume, 2 tone, and a 3-way toggle SW. The tone knob can be pulled to allow coil tapping of each pickup, making the guitar even more versatile. The pegs feature new Tweaked Phase III tuners. A new set screw has been added to prevent the worm gear from slipping by pulling on both the tuner gear and the worm gear. This minimizes the loss of string vibration that tends to occur with conventional locking tuners and allows the vibration to be transmitted to the body as much as possible. As a result, the resonance of the entire guitar is improved, resulting in a richer, more dynamic tone. We hope you will try this unprecedented new dimension of sound.

Body, Neck, and Fingerboard
The body is a royal combination of flame maple top, mahogany back, and mahogany neck. Ebony fingerboard.
Condition
Paint fading on the top of the body, paint chipping on the tip of the head, one shallow ding on the back of the neck near the first floor, and other buckle scratches, minor scuffs, and dings scattered throughout the body.
There are also some scratches, scuffs, and dings on the buckle. The strap pin has been replaced.

There are no problems with the neck, frets, truss rod, or any other playing-related conditions.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 17 244090
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Tag, Wrench, Manual
Weight: 3.63kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 1.8mm above 12th fret
String height on treble string side: 1.3mm above 12th fret
Nut width: 43.6mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problems in normal use.

Serial number 17 244090

Year of manufacture2017

Country of manufacture USA

CaseHard case (genuine)

AccessoriesTag, wrench, instruction manual

Weight3.63kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height

String height: 1.8mm above the 12th fret on the bass string side

String height 1.3mm above the 12th fret on the treble string side

Nut width 43.6mm

SCALE635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment