USED Fender Custom Shop / 1951 NO CASTER RELIC BLACK [03]

The 2014 Fender Custom Shop/1951 Nocaster Relic Black is now in stock!

Reproduction of the 1951 Nocaster with a 2-piece ash body and maple neck.
Fingerboard radius is 9.5R. Vintage type 21 frets are installed.
The neck shape is "51 Nocaster U-Shape" and has a firm grip.

The entire body has been subjected to weather checks and other remnants of the original.
There are also parts where even the wood has been stripped off, giving it a look as if it has been heavily played for many years.

Two black bobbin pickups, which are believed to be original, are installed.
The controls are a simple 1Vol/1Tone.

The condition of the guitar is different from the original.
Also, some parts are duller than the original.
The selector switch cap has been replaced with one for a strat. The original hard case is still in place, but some of the keys are broken.
The original hard case has some damage to the keys.

It is a black color no-caster with a strong look!
Please consider it!
Truss Rod: Tightening direction has room / Loosening direction has room
Neck condition: No problem
Fret: 70-80%.
Case: Original hard case (key is damaged)
Accessories: Certificate, manuals, etc.
Serial number: R13267
Weight (kg):3.12

* Due to the nature of this product, we are unable to move it between stores.
Item rank: B+: Some scratches, but no problem in normal use.

Serial number: R13267
Year of manufacture: 2014
Country of manufacture: USA
Case: Hard Case
Accessories: Shield, Strap, Cloth, Certificate
Weight: 3.12kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 24.1mm
Neck thickness near 12th fret: 25.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number R13267

Year of manufacture 2014

Country of manufactureUSA

CaseHard case

AccessoriesShield, strap, cloth, certificate

Weight 3.12kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.8mm

Neck thickness near 1st fret 24.1mm

Neck thickness 25.4mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment