USED MARTIN / D-16GT NAT [03]

MARTIN D-16GT NAT is now in stock!

MADE IN USA Martin.
Top is made of Sitka spruce, sides and back are mahogany, neck is select hardwood, and fingerboard is made of Richlite.

Pickups have been retrofitted.

There are many scratches and dents on the body, head, and neck.
There are cracks on the body.
Parts are dull and rusted.
There is a slight bulge on the top, but it does not affect the playability.
The frets are about 60% high.
B: There are dents, scratches, dull metal parts, and rust, which are commensurate with the age of the instrument. There are numerous scratches and dents on the body, head, and neck.
Country of manufacture: U.S.A.
Year of manufacture 2008
Neck: within proper range
Fretboard: The frets are not severely uneven and are approximately 60% high.
Repair and parts replacement history: Rod adjustment, mortise and tenon, bracing peeled and glued.
Accessories Hard case (genuine)

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: U.S.A.
Case: Hard Case
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.9mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, grinding, bracing peeling and gluing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand in advance.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly, there are scratches & feeling of use, but no problem in normal use

Country of manufacture: U.S.A.

CaseHard case

No truss rod problem.

Fret remainder no problem, there is enough fret height

String height 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 43.2mm

Neck thickness near the 1st fret 20.9mm

SCALE 648mm (25.5")

RADIUS305mm (12")

Strings D'Addario EJ-16 / .012-.053 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, mortise and tenon adjustment, bracing peeling gluing