USED Paul Reed Smith (PRS) / 2002 Santana III 10Top Santana Yellow [03]

Used 2002 Carlos Santana signature model "Santana III 10Top" is in stock!

Santana
This is Carlos Santana's signature model and the successor to SANTANA II. Flame maple top, mahogany back, and mahogany neck. The fingerboard is made of rosewood. The unique neck scale of 24.5 inches and the slightly thicker original neck shape are feedbacks of Santana's requests.

Pickups
Both the rear and front pickups are equipped with original signature pickups. The mid-range of the pickups is very flexible and can be changed from a sound that fits well in an ensemble to a powerful sound with a long sustain. This is one of the best looking and sounding guitars ever made.

Condition
There are some paint chips on the neck joint, the heel of the neck, and the entire body. There are also some minor scratches and dings, which are commensurate with the age of the instrument.

There are no problems with the neck, frets, truss rod, or any other playing-related conditions.
The neck, frets, truss rod, etc. are all in good playing condition and have been fully adjusted and fretted at our repair center upon arrival.

Replacement parts
The condenser has been replaced with an orange drop.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 2 64234
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Arm * Tag missing
Weight: 3.91kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 1.8mm above 12th fret
String height on treble string side: 1.3mm above 12th fret
Nut width: 42.9mm
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
2 64234

Year of manufacture
2002

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
Arm * Tag missing

Weight
3.91kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
1.8mm above 12th fret

String height on treble string side
1.3mm above the 12th fret

Nut width
42.9mm

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment