USED Nishgaki Guitars / Amnis Novus Hiroshi Shibasaki Spec [03]

Made in 2025. Nishgaki Guitars Amnis Novus Shibasaki Hiroshi Specs" is in stock now!

Nishgaki Guitars
Nishgaki Guitars is designed and made by luthier Mr. Nishigaki in Miki City, Hyogo Prefecture. The body, neck, and fretboard are made of solid wood.

Body, neck, and fingerboard
The most eye-catching feature of this guitar is its solid body with beautifully wavy figured maple laminated on the front and back, with 2-ply alder in between. The neck is made of maple with tiger wood, Honduras rosewood fingerboard, 25.5 inch long scale with 22 frets, and the nut width is supposed to be slightly narrower than 42mm.

Pickups
Pickups are both front and rear Suhr/Thornbucker. The freewheel SW can be used not only for pickup selection but also for coil-tapped pickup selection, and it can express from high-gain to crisp half-tone. * Please note that "Shur" is misspelled in the pickups section of the spec sheet. However, we removed the pickup from the body before commercialization and confirmed that it is a genuine Suhr/Thornbucker from the label on the back bobbin!

Hardware
The hardware, including the two-point tremolo and locking tuners, is made by GOTOH, which boasts of its durability and reliability, and the truss rod can be adjusted with a wheel nut for easy maintenance.

The transparent appearance without coloring that makes the most of the charm of carefully selected wood, as well as the texture, warmth, and raw sound of the wood can be directly tasted through the ultra-thin coating, is one of the charms of this model! Please check it out for yourself if you are interested.
Condition
The body is dotted with small dents and dings, but due to the natural color of the wood, the damage is not noticeable at a glance and can only be seen by touching or holding it up to the light. The hardware does not have any noticeable signs of use, and there are currently no operational problems.
Product Rank: B+: Some scratches, but no problems in normal use.

Serial number: 25054
Year of manufacture: 2025
Country of manufacture: Japan
Case: Gig bag (non-genuine/Ibanez)
Accessories: Arms, wrench, spec sheet
Weight: 3.45kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fret Residuals: No problem, as good as new
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 25054

Year of manufacture 2025

Country of manufacture Japan

CaseGig bag (non-genuine/Ibanez)

AccessoriesArm, wrench, spec sheet

Weight 3.45kg

Truss rod no problem, rod checked up to 60 degrees left and right, no problem.

No fret remainder problem, same condition as new

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

SCALE 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment