USED FENDER USA / 1976 Stratocaster 3 Color Sunburst [03]

Maple neck, 1976 Stratocaster in stock!
S/N:672411

Neck Date:0903-1963
09"→Model code(09=Stratocaster)
03"→FB number(03=Maple )
19"→Week (19=19th round)
6" →Year of manufacture* last digit (6=1976)
3" →Day of the week (3=Wednesday)

PU:12 18 76
(Gray Bobbin)
Neck|Middle|Bridge(the same)

Pot:137 7620
Vol.|Tone1.|Tone2.(the same)

The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.

The guitar is in relatively clean condition considering its age, although there are some scratches, dull parts, and other signs of use and age. The strap pins and neck joint screws are rusty, and the head and body have some signs of use, including sun damage and fading.
This item has been cleaned, maintained, and set up by our repair department.

* Please note that this item is not available at any other Ishibashi Music stores or locations. Please contact the Ishibashi Gakki Ochanomizu flagship store if you have any questions.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 672411
Year of manufacture: 1976
Country of manufacture: USA
Case: Hard Case (Fender)
Includes: Original hard case
Weight: 4.01kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.3mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.