USED Gibson USA / 2022 Les Paul Standard '50s Tobacco Burst [05]

2022 Les Paul Standard '50s Tobacco Burst in good used condition!

This is a perfect guitar for players seeking a Les Paul Standard of yesteryear with the rounded neck of the 50's. It has a maple top and mahogany body.
It has a maple top and mahogany body, and is equipped with the well-known Burstbucker 1 (Neck)/Burstbucker 2 (Bridge) pickups.
The hand-wired electrics are equipped with orange drop capacitors, rather than the foundations seen on recent Gibsons.
Keystone pegs, unwired ABR bridge with aluminum bridge tailpiece, and other vintage-inspired touches.

This is a used instrument with minimal signs of use.
It has been cleaned and set up at our repair center after purchase and is ready for immediate use.

Body Shape -Les Paul
Body Shape -Les Paul
Body Material -Mahogany
Top -Maple
Weight Relief -None
Finish -Gloss Nitrocellulose Lacquer

Neck
Material -Mahogany
Profile -Vintage 50s
Scale Length -24.75" / 628.65mm
Fingerboard Material -Rosewood
Fingerboard Radius -12"
Number Of Frets -22
Frets -Medium Jumbo
Nut Material -Graph Tech
Nut Width -1.69" / 43.05mm
End of Board Width -2.26" / 57.4mm
Inlays -Acrylic Trapezoids

Hardware
Finish -Nickel
Bridge -ABR-1 Tune-O-Matic
Tailpiece -Aluminum Stop Bar
Pickguard -Cream
Control Knobs -Gold Top Hats w/ Pointers
Switch Tip -Amber
Switchwasher -Cream
Jack Plate Cover -Cream

Electronics
Neck Pickup -Burstbucker 1
Bridge Pickup -Burstbucker 2
Controls - 2 Volumes, 2 Tones & Toggle Switch (Hand-wired with Orange Drop Capacitors)
Miscellaneous

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 222920070
Year of manufacture: 2022
Country of manufacture: USA
Case: Hard Case
Accessories: Wrench
Weight: 4.13kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 22.8mm
Neck thickness near 12th fret: 25.4mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 222920070

Year of manufacture 2022

Country of manufacture USA

CaseHard case

AccessoriesWrench

Weight4.13kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.8mm

Neck thickness near the 1st fret 22.8mm

Neck thickness near 12th fret: 25.4mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment