USED Fender Japan / TL62B Modified 3-Tone Sunburst [05]

Fender Japan made TL62B is now in stock.

This model was produced by Fender Japan based on the 1962 Custom Telecaster.
This model has been modified with the store's original modifications: Seymour Duncan APTR-1 (front) and APTL-1 (rear) pickups, CRL selector, CTS pots, and Orange Drop capacitors. Switchcraft jacks are used.

The bridge is a side-less type with independent saddles for each string, and the jack plate is a square metal plate.
The bridge is a good old style of Telecaster, and some people have a hard time using it, but it has been updated to a modern style.

All cavities are treated with conductive treatment, and an aluminum sheet is applied to the entire surface behind the pickguard for noise suppression.

There is no evidence that the original jack was installed in the cavity of the jack section, so we believe that this is not a modified model, but rather a model that was originally manufactured.

The model has been used, but there is no major damage, and it maintains a clean appearance.
It has been checked and adjusted as a whole by a professional repair person after arrival, and is in good playing condition.

* We are sorry, but due to the nature of this item, we will not be able to offer this item at other stores or locations within Ishibashi Gakki. Please contact Ishibashi Gakki Shibuya store for further information.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: T054728
Year of manufacture: 2007-2010
Country of manufacture: Japan
Case: Soft case
Weight: 3.63kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, enough fretboard height.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: 10-46
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, fret adjustment

Specs

Grade
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
T054728

Year of manufacture
2007-2010

Country of manufacture
Japan

Case
Soft case

Weight
3.63kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
24.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings at setup
10-46

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, fret adjustment