USED WARWICK / Teambuilt Pro Streamer CV 5st Nirvana Black Trans Satin [06]

Warwick Pro Series is pleased to announce the arrival of the Teambuilt Pro Streamer CV 5st, a regular line of guitars produced under the supervision of the master builder at the home factory in Germany!
The Streamer CV is a passive model based on the popular Streamer.
The Streamer CV features an ash body, rosewood fingerboard, maple neck, dot inlays, and a pickguard, all of the woods and specifications traditionally used for electric basses.
The Pro Series is made in Germany, just like the Custom Shop, but offers a high cost-performance ratio!

On the other hand, it is a 5-string bass with a narrow nut width of 45mm and 21 frets, which is a spec that will satisfy your itch for a good passive 5-string bass.
The pickguard is floating, but there are only minor scratches and it is in very clean condition.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.

The condition may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not promise that they will be the same when you receive the item.
We try to delete product information as quickly as possible, but not necessarily in real time.
We apologize in advance if the item is sold out after you have placed your order.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: M-009590-21
Year of manufacture: 2022
Country of manufacture: Germany
Case: Original soft case (missing shoulder)
Accessories: None
Weight: 3.78kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.6mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 45.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.7mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
M-009590-21

Year of manufacture
2022

Country of manufacture
Germany

Case
Genuine soft case (missing shoulder)

Accessories
None

Weight
3.78kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret remaining
No problem, there is enough fret height

String Height Low String Side
2.6mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
45.0mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
24.7mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment