USED FENDER JAPAN / ST-W / VWH Double Neck [06]

This double-neck ST model celebrates Fender Japan's 30th anniversary.
Alder body with maple neck/rosewood fingerboard, Japanese single PU, respective volume, master tone, 5-way pickup selector, and neck switch controls.
Truss rod tightening direction limit on the 6th string side.
There are some use marks such as dents and scratches on the body back and dents on the body side.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD12021523
Case: Hard Case
Accessories: Arm
Weight: 6.06kg
Truss Rod: 6 string side: No problem at the limit of the rod with a note / 12 string side: No problem, rod is checked to 60 degrees left and right, no problem
Fret Remaining: No problem, sufficient fret height.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 6 string side: 7.25"/ 12 string side: 9.5"
Strings in setup: 6 string side: ERNIE BALL 2223 / .009-.042 set / 12 string side: D'Addario EXL150 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction, and gouge removal

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD12021523

Case
Hard case

Accessories
Arm

Weight
6.06kg

Truss Rod
6-string side: No problem with the neck at the limit of the rod with a note / 12-string side: No problem with the neck at the limit of the rod with a note / 12-string side: No problem with the rod at the limit of 60 degrees to the left and right with a check.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
25.2mm

Scale
648mm (25.5")

RADIUS
6-string side: 7.25"/ 12-string side: 9.5"

Strings for setup
6 string side: ERNIE BALL 2223 / .009-.042 set / 12 string side: D'Addario EXL150 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction, and gouge removal