USED FENDER MEXICO / Deluxe Stratocaster Black [06]

A used 2019 Deluxe Stratocaster made in Mexico is in stock.
It has an ash body, maple neck, and Perferro fingerboard.
The Vintage Noiseless pickups on this guitar are impressive for their distinctive sound that combines noise-free tone with reduced hum. A push/push mini-switch allows the bridge pickup to be activated while maintaining ease of use.
There are some minor stains and scratches on the head surface, and a ding around the 4th fret on the fingerboard.
There is also a minor crack on the neck pocket.
The body is in player's condition with some scratches and minor stains.
The instrument has been adjusted and cleaned at our repair center, and there are no problems with the playing surface.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: MX19073645
Year of manufacture: 2019
Country of Manufacture: Mexico
Case: soft case
Includes: arm
Weight: 3.71kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and deburring

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
MX19073645

Year of manufacture
2019

Country of Manufacture
Mexico

Case.
Soft case

Accessories
Arm

Weight
3.71kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
22.2mm

Neck thickness near 12th fret
22.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, deburring