USED FENDER JAPAN / ST72 OWH [06]

FENDER JAPAN ST72 OWH
Manufactured by Fujigen from 1989 to 1990.
This model is a reproduction of the '72 specification with a large head, bullet truss rod nut, and 3-point stopper neck.
This off-catalog model is marked CST50R on the neck pocket and is believed to be a Squier body.
Basswood body, maple neck, and rose fingerboard.
Three Japanese pickups are installed.
The pickup covers and control knobs are black, giving the guitar a look reminiscent of the models used by Ritchie Blackmore.

Back panel and tremolo arm are missing.
There are several dents on the top of the body.
There is some paint peeling near the 4th fret on the back of the neck.
The saddles on the 6th and 5th strings have been replaced, and there are some other minor scratches, dings, and dull metal parts, but the instrument is still in good condition.
It has been cleaned and adjusted after arrival, so there are no problems with playing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: MIJ I023135
Country of manufacture: Japan
Case: Soft case
Weight: 3.61kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.9mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Alterations: 2 saddles
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, saddle replacement

* There are some scratches, dents, etc. that are hard to see in the pictures or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

6 months old

Serial No.
MIJ I023135

Country of manufacture
Japan

Case
Soft case

Weight
3.61kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.9mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
22.7mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified parts
2 saddles

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, saddle replacement