USED GIBSON USA / Les Paul Standard Vintage Sunburst [06]

GIBSON USA Les Paul Standard Vintage Sunburst Preowned is in stock now!
Made in USA in 1989.
3 piece maple top, mahogany back body, mahogany neck and rose fingerboard.
Pickups are foundation type, rear HB-L and front HB-R, developed with the cooperation of Bill Lawrence.
There is a buckle scratch on the body back and a slight wood chip on the head top.
The bridge wire is missing and the saddle comes off when the strings are removed.
There are some other minor scratches, dents, and dull metal parts, but the instrument is still in good condition.
It has been cleaned and adjusted after arrival and has no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 81599544
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Weight: 4.090kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Residuals: No problem, as good as new.
String Height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and deburring at Yamatech

* There are some scratches, dents, etc. that are difficult to see in the photos or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
81599544

Year of manufacture
1989

Country of manufacture
U.S.A.

Case
Hard Case

Weight
4.090kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, same condition as new

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above 12th fret

Nut Width
42.5mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
24.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts
Cleaning, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and deburring at Yamatech